Những công cụ cắt đặc biệt - MTA Vietnam

Những công cụ cắt đặc biệt Feanor sẽ mang đến những công cụ cắt hiệu quả cao hoàn toàn mới với những lưỡi dao sắc bén được sản xuất ngay tại MTA VIETNAM2010. Feanor đã thiết kế ra và được cấp bằng sáng chế là công nghệ hoàn toàn mới, cho phép chế tạo những đường rãnh trên roto với hiệu suất cao hơn nhiều chỉ thông qua hai bước và sử dụng hai công cụ dùng cac-bua đặc và hệ thống làm lạnh nội tại, một hệ thống để xử lý và một hệ thống để làm bóng. Đã được thử nghiệm ở rất nhiều nhà máy tại Châu Âu và gần đây là tại Trung Quốc và Ấn Độ trên những loại máy mới và có công suất hoạt động lớn, giải pháp này đã cho phép giảm tổng lượng thời gian sản xuất trên một roto cơ bản từ 1200 giờ xuống còn 960 giờ.

Từ khoá: giao thoa laser, hiệu chuẩn các máy công cụ, máy công cụ kiểm tra, kiểm tra việc phối hợp đo lường máy móc, phần mềm kiểm soát chất lượng, đào tạo 6 sigma, Thiết kế của thí nghiệm, FMEA, Không Mode và Phân tích Hiệu quả, độ chính xác đo lường, dụng cụ đo lường, xanh lá cây vành đai, vành đai màu vàng, nạc sản xuất. đặc biệt các công cụ cắt, bảo trì máy tính, máy sửa chữa.

MTA Vietnam Machine Tools Exhibition 6-9 July

UFP and Feanor will exhibit at MTA Vietnam, machine Tools Show, booth AK 4-4 within the premises of the Italian Technology  Pavilion. Exhibition website MTA http://www.mtavietnam.com
Feanor will display movies on the new technology for turbine shaft grooving using solid carbide pinetree cutters with internal cooling, the latest development of LP30 laser interferometer for fast acquisition up to 20 m/s speed (in one single direction) and the 6 sigma Green Belt Training Program.

We are willing to start Six Sigma Training in Vietnam soon - said Feanor CEO - which will be our first engagement in the South East Asian market and at the same time increase the presence of our metrology products in this area. We have been very active in China recently, but this area also deserves attention and is ready to improve its metrology structure and calibration laboratory equipment.

Feanor joined Chinese MOE Vocational Training Program

Article here (Chinese) 

Green sensor thin film Platinum temperature sensors: software from Estonia, hardware from China

Feanor OU signed an agreement for the development of Platinum temperature sensors in Xi'an Research Park.
This technology is actually only available from manufacturers in USA and Germany and saw a rapid increase in the last years, despite the international financial crisis which impacted the automotive and related manufacturing business. These 'green' and versatile sensors have an estreme wide measuring range, from -196 °C to 1000 °C and are employed in aircrafts (more than 100 in each single aircraft), engines, process technology, micro-heaters, gas sensors, bio-sensors and flow sensors.
Feanor will develop data acquisition software and the R&D base. The new plant, which includes a clean room, will be operational in 2011 and will employ approximately 400 people.

Joint research from China and Estonia or high frequency measurement in space environment

Feanor OU, Tallinn, Xi’An North WesternTechnical University and Chinese network, Xi’An reached a cooperation on joint study on a new device for measurement in low pressure fluid mechanics for use on nanosatellites.
The idea of a nanosatellite has nothing to do with nanotechnology, a term that refers the precise engineering of materials on atomic and molecular scales. Nanosatellites are appealing because their small size makes them affordable. From a military perspective, a nanosatellite may be useful for the redundancy it could offer. Its small size can also help in avoiding detection.

Feanor will provide the measurement technology through a double frequency Zeeman laser interferometer source with increased speed, measuring istantaneous position, speed and acceleration of an extrememly light pendulum in a vacuum chamber vibrating at a frequency close to 10 kHz, at different environmental temperatures and pressures.
A software application using Labview 7 will be developed to analyse data. The development of the measuring device is supported by Chinese government, as North Western University in Xi'An is one of the key research centers.

Estonian special tools approved by Chinese nuclear equipment manufacturer

Feanor OU has been granted participation to a tender for development and supply of F type cutters for manufacturing of nuclear power generation equipment by Shanghai Electric (China), after successful dimensional pre-testing. F Cutters will be used for blade manufacturing on existing machines provided by US manufacturer and later on indigenous machines. Design is planned to start in the next weeks and testing will be held in Shanghai in October 2010.

Estonian company successful in turbofan manufacturing technology

Feanor OU successfully tested HM brazed milling cutters with 40° helix, without coating and with a new Zirc coating, in manufacturing of Aluminim alloys for aerospace.
This cutter has been competing against other manufacturers from Germany, Israel and Japan and will be used in the largest Chinese manufacturer of military aircraft engines.
Also a special guided reamer in solid carbide has been found effective in manufacturing high speed Titanium alloy components.

欢迎光临汉诺威展览

Industrial Automation, Factory Automation, Building Automation, Motion, Drive and Automation, Digital Factory, Subcontracting, Energy, Wind energy, Power Plant Technology, Surface Technology, Micro Technology, Research & Technology. 工业自动化，工厂自动化， 楼宇自动化，运动控制，传动及自动化，数字化工厂， 分包，能源，风能，电厂技术，表面处理技术，微技术， 研究与技术。

Welcome to visit Feanor in the booth 2-D65 (Estonian Industrial Federation). 欢迎光临访问芬诺公司展位2 - D65 （爱沙尼亚工业联合会）

获得免费展览票这里 （英语）：

http://www.hannovermesse.de/ticketregistration?Rg8bq49s2ts7m7

激光干涉仪和机床检查，用户手册，指示，原则

激光干涉仪和机床检查，用户手册，指示，原则
更轻巧的激光测量及校准
机床数控化改造的必要性及其改造方法- 工业设计- 工科- 就学网
下载用户手册 http://www.feanor.com/LP30_manual.pdf

新机床校准服务使用高精度激光干涉仪 - 检测校准服务

Our new calibration service allows calibration of your three coordinate measuring machines and your machine tools, is an inexpensive and fast service。
我们的新机床校准服务使您的校准三坐标测量机和您的机床， 廉价和快速。

For each machine we will perform accurate inspection and provide you with a full calibration report.
对于每一个机器，我们将进行准确的检查，并为您提供全面的校准报告。

You do not need to purchase a laser interferometer, if you have just a few machines to inspect.
您不需要购买激光干涉仪，如果你有几个机床检查。

This service has been designed for customers who need to inspect and assess geometric accuracy of their machines, at a minimum cost.
这项服务旨在为客户谁需要检查和评估的几何精度他们的机器，在最低的成本。

Total cost for calibration can vary between 10000 Yuan and 15000 Yuan, according to machine type 总成本可校正之间10000元和15000元，根据机器类型

For further information please contact Luca 如需进一步信息，请联系卢卡先生www.feanor.com/laser_cn.htm

Keywords: 检测校准服务, calibration of three coordinate measuring machines with laser interferometer, 校准三坐标测量机，激光干涉仪
laser interferometer for calibration of three coordinate measuring machines 激光干涉仪的校准三坐标测量机
calibration service with laser interferometer 校准服务的激光干涉仪
机床校准服务
下载用户手册 http://www.feanor.com/LP30_manual.pdf